The one Eichler figure we publish

| Figure | What it covers | Source and year |
|---|---|---|
| About $27,500 average | A foam roof installed on an Eichler, as reported by one Bay Area foam installer | Eichler Network, Lost in the Dark No More, c. 2024 |
It's one installer's average for one system. Treat it as a reference point, not a quote. National cost guides publish lower numbers, but they aren't Eichler-specific. Bay Area labor, insulation thickness and the extra work Eichlers tend to need all push prices up.
What moves the price
- Roof area. Eichler roofs extend over carports, porches and wide eaves, so the roof is bigger than the floor plan.
- Tear-off. Tar and gravel and multi-ply built-up roofs usually come off. Foam and some single-ply systems can go over a sound roof. California code doesn't allow a new layer over two or more existing ones (CRC R908). Tear-off vs. overlay.
- Insulation thickness. Climate zones 2, 4 and 12 require R-14 on most reroofs, and some owners go thicker (2025 Energy Code). Insulation.
- Cool roof surface. In zones 4 and 12, a white or reflective top layer is required unless you add enough insulation instead. Climate zones.
- Wood repair. Rotted fascia, beam ends and decking found during tear-off are often priced as extras. Ask how they'll be billed. Beam rot.
- Skylights. Replacing skylights during the reroof costs less than doing it later (Roofing Survival Guide). Skylights.
- Drainage. Correcting slope with tapered insulation or foam, or adding drains, adds material and labor (Roofing Survival Guide). Drainage.
- Wiring, solar and HVAC. Rewiring under the roof, removing and resetting panels, and running mini-split lines all affect the schedule and the bill. Wiring · Solar.
How to compare quotes
- Ask every roofer to price the same scope: system, insulation R-value, tear-off, cool roof rating, skylights, edge metal and drains.
- Ask how they'll price rotted wood found after the old roof comes off (per foot, per sheet, or time and materials).
- Ask who pulls the permit and files the Energy Code paperwork.
- Ask for the warranty in writing, both the maker's and the installer's.
- Check the license on the CSLB site. Choosing a roofer.
Every roofer we work with is licensed and insured.
Book a free roof inspectionFrequently asked questions
Why don't you list a price per square foot?
Published per-square-foot numbers range widely, and most come from contractors selling a system or from national averages that don't reflect Eichler work. We'd rather show one credited Eichler figure and have a roofer measure your roof.
Does adding insulation cost more?
Yes, and it's usually worth doing during a reroof because there's no attic to insulate later. The Eichler Network reported that an insulated built-up roof and a foam roof come out close in price, and insulated single-ply tends to cost the most (Eichler Network).
Will insulation pay for itself?
Not quickly. The Eichler Network says recovering the cost from gas savings alone "would take several decades." The payoff is comfort (Eichler Roofing).
Sources
- Eichler Network: Lost in the Dark No More (reroofing systems and installers)
- 2025 California Residential Code R908 Reroofing (GoCodebook mirror)
- 2025 California Energy Code §150.2(b)1I, roof alterations (Energy Code Ace)
- Eichler Network: Roofing Survival Guide
- CSLB: Check a license
- Eichler Network: Roof Insulation
- Eichler Network: Eichler Roofing (Barry Brisco)
Sources reviewed November 17, 2026. Confirm permits, design rules and requirements with your contractor and your city or county. This page is general information, not legal or insurance advice.
