What BAAQMD says
The Bay Area Air Quality Management District's asbestos FAQ covers renovation of homes (BAAQMD):
- Roofing is among the places asbestos can be found. Anything "that is not wood, metal, glass, rubber" is suspect, and only lab testing confirms it.
- For homes with four or fewer units, a full asbestos survey isn't required. Sampling is required only if the work will disturb HVAC ducting, acoustic ceilings or plaster, textured or skim-coated walls, cement siding or stucco, or resilient flooring. Roofing isn't on that list.
- Removing regulated asbestos-containing material at or above 100 square feet, 100 linear feet or 35 cubic feet requires notification 10 working days ahead. For homes with four or fewer units, 72-hour notice is allowed for an extra fee.
- Intact cement (transite) roofing is a category that isn't regulated while intact, but weathering or improper removal can change that.
What to do
- If you're tearing off an older roof, ask your roofer whether they test, or hire a consultant to sample.
- If it tests positive, removal goes to a licensed abatement contractor and follows the district's notice rules.
- Get results in writing before tear-off.
Other work in the same project, like ducting or textured ceilings, may require sampling on its own. Read the BAAQMD FAQ or call the district.
Every roofer we work with is licensed and insured.
Book a free roof inspectionFrequently asked questions
Did original Eichler roofs contain asbestos?
We haven't found a reliable source either way, so we don't say they did. Testing is the only way to know for your roof.
Who tests roofing for asbestos?
A certified asbestos consultant or lab. BAAQMD says only lab analysis, such as polarized light microscopy, confirms asbestos (BAAQMD).
Sources
Sources reviewed November 17, 2026. Confirm permits, design rules and requirements with your contractor and your city or county. This page is general information, not legal or insurance advice.
