A gabled Eichler house with a low-slope roof, clerestory glass and a two-car garage on Fairglen Drive in San Jose.

Home › Guides › Fire zones and Class A

Does your Eichler reroof need a Class A roof?

Short answerIf your Eichler is in a Very High Fire Hazard Severity Zone and you replace more than half the roof within a year, California requires the whole roof covering to be at least Class A. Parts of Palo Alto, Cupertino, San Jose, Concord and Oakland are mapped in Very High zones, and Marin County's fire department requires Class A in its wildland-urban interface areas.

Every roofer we work with is licensed and insured.

Updated · Sources reviewed November 17, 2026 · By Eichler Roof Replacement

  • Active C-39 roofing license, checked on CSLB
  • Contractor's bond and workers' comp on file
  • Low-slope systems: foam, built-up, modified bitumen, single-ply
  • Free written estimate, no obligation

The state rule

Where more than 50 percent of a roof is replaced within one year in a Very High Fire Hazard Severity Zone, the entire roof covering has to be at least Class A (Health and Safety Code 13132.7). The building code carries the same rule; check the current section number with your city (building code text).

Which Eichler areas have Very High zones

Our check of the state's maps found Very High zones within Palo Alto, Cupertino, San Jose, Concord and Oakland, and High or Moderate zones within San Rafael and Walnut Creek (CAL FIRE). Zones are mapped parcel by parcel, and most flatland Eichler tracts aren't in them, so check your address.

CAL FIRE released updated Local Responsibility Area maps to counties in phases during 2025 (CAL FIRE).

Marin County

Marin County Fire's standard for remodels in wildland-urban interface areas says "Class A or higher is required for all roofs," gutters need covers, and eave vents must be removed or made ember-resistant when a reroof exposes the rafters (Marin County Fire Standard 222). Marin Eichlers.

Every roofer we work with is licensed and insured.

Book a free roof inspection

Frequently asked questions

How do I find my fire hazard zone?

Look up your address on the State Fire Marshal's fire hazard severity zone maps (CAL FIRE). Castro Valley and other unincorporated Alameda County addresses can be checked on the county fire department's viewer (Alameda County Fire).

Do foam and single-ply roofs come in Class A?

Many systems are tested as Class A assemblies, but the rating depends on the exact assembly. Ask your roofer for the listing that matches what they'll install.

Sources

Sources reviewed November 17, 2026. Confirm permits, design rules and requirements with your contractor and your city or county. This page is general information, not legal or insurance advice.

CallBook inspection