Which Eichlers have gables
Palo Alto lists low-slope gable, flat, flat-with-shed, flat-with-gable and chevron roofs, with slopes typically shallow and often 3 in 12 (Palo Alto guidelines). Steep, glass-filled center gables, the "A-frames," show up in Claude Oakland designs from about 1962 (Melting the Mystique). Even the 1960s center-gable models are "more flat than not," the Eichler Network says (Eichler Roofing).
Two sets of rules on one roof
Low-slope means a pitch under 2 in 12. In climate zones 4 and 6 to 15, the low-slope parts of a mixed roof follow the low-slope cool roof rule and the steep parts follow the steep-slope rule (CEC compliance manual). A 3 in 12 gable is steep-slope under that definition. Climate zones.
Details to get right
- Gable glass and clerestories. These are character-defining features in Palo Alto's guidelines (Palo Alto guidelines). Flashing where the roof meets the glass wall is a common leak point.
- Valleys and transitions. Where the gable meets flat sections, the two systems have to tie together.
- Ridge and edge profile. Thick insulation raises the gable edge as well. Ask to see a section drawing.
- Material look. Eichler guidelines in Palo Alto and Sunnyvale favor visually flat materials and shallow slopes. Permits and design rules.
Every roofer we work with is licensed and insured.
Book a free roof inspectionFrequently asked questions
Can I put shingles on a gable Eichler?
Check your city's rules first. Palo Alto notes original Eichler roofs were typically covered with visually flat materials and that shingles are rare (Palo Alto guidelines). Sunnyvale's guidelines call for flat or shallow roofs with a maximum slope of 3 in 12 (Sunnyvale guidelines).
Sources
- Palo Alto Eichler Neighborhood Design Guidelines (adopted Apr 2, 2018, Res. 9748)
- Eichler Network: Melting the Mystique, p.2
- Eichler Network: Eichler Roofing (Barry Brisco)
- California Energy Commission: 2025 Single-Family Compliance Manual, Ch. 9
- City of Sunnyvale: Eichler Design Guidelines (adopted July 28, 2009)
Sources reviewed November 17, 2026. Confirm permits, design rules and requirements with your contractor and your city or county. This page is general information, not legal or insurance advice.
